Mondaine Lilli Watch for women

Visit this page to find your own Mondaine watch.

Mondaine Lilli Watch | A666.30339.11SBM

Feminine, elegant and easy to read. With a 20mm polished stainless steel square case, the Mondaine Lilli is so feminine and elegant. Lilli is available with either a black or red thin leather strap, or an open-linked steel bracelet for ultimate appeal. The white dial reflects Mondaine’s Official Swiss Railways Watch easy-to-read iconic look.

Model number A666.30339.11SBM
Family/Series Line Extension
Function Time
Movement (manufacturer, ref) RONDA 753
Movement (type) Quartz
Case size/diameter (mm) 20.00
Case material Stainless Steel polished
Case back Pressed Caseback
Crown Regular Gasket
Crystal/Glass material Hardened Mineral
Water resistance (m/ft/atm) 30 / 100 / 3
Strap/Bracelet material Metal
Strap/Bracelet finishing Polished
Strap width at lug (mm) 6.00
Battery reference 379
Battery lifespan 28 months
Origin Swiss Made

Mondaine Lilli Watch Red Strap

Visit this page to find more choices of Mondaine watch straps.

Mondaine Ladies Lilli Watch Red Strap

Feminine, elegant and easy to read. With a 20mm polished stainless steel square case, the Mondaine Lilli is so feminine and elegant. Lilli is available with either a black or red thin leather strap, or an open-linked steel bracelet for ultimate appeal. The white dial reflects Mondaine’s Official Swiss Railways Watch easy-to-read iconic look.

Model number A666.30339.11SBC
Family/Series Line Extension
Function Time
Movement (manufacturer, ref) RONDA 753
Movement (type) Quartz
Case size/diameter (mm) 20.00
Case material Stainless Steel polished
Case back Pressed Caseback
Crown Regular Gasket
Crystal/Glass material Hardened Mineral
Water resistance (m/ft/atm) 30 / 100 / 3
Strap/Bracelet material Genuine Leather
Strap/Bracelet finishing Polished
Strap width at lug (mm) 6.00
Battery reference 379
Battery lifespan 28 months
Origin Swiss Made

How to fit a watch strap to Mondaine watch? -Part 2

Video 2 – How to fit your Mondaine Watch strap


FITTING YOUR MONDAINE WATCH STRAP

Fitting the strap is easy, but slightly fiddly, so make sure you allow time to do it correctly.  The straps come with a web link to instructions on how to fit.

In this video I will take you through that exact instructions.

You will learn:

• About the two spring bars  and what they’re used for

• I will show you the  exact tools you need to change your strap

• Follow the exact step-by-step instructions how to insert the spring bars on your strap

Once you have watched the above video, be sure to check out Part 3 below

 

Follow our siste-site to see the full selection of straps, if you are seeking Helvetica straps click here.

PS: Enjoy and share.

Choosing the correct Mondaine watch Strap – Part 1

Video 1 – How to choose your Mondaine watch strap

                             

In this three part video training I will walk you through that exact process.

You will learn:

• How to Get the  right size for your watch strap 

• Understanding the type of replacement straps available for  your Mondaine

• I’ll show you the 4 types of straps and how to locate the IDs (numbers) for each strap

Once you have watched the above video, be sure to checkout Part 2 below

Enjoy and share 🙂

Is my Mondaine waterproof?

No!  But it is water resistant.

Water Resistant is a common mark stamped on the back of wrist watches to indicate how well a watch is sealed against the ingress of water. It is usually accompanied by an indication of the static test pressure that a sample of newly manufactured watches were exposed to in a leakage test. The test pressure can be indicated either directly in units of pressure such as bar or (more commonly) as an equivalent water depth in metres (in the United States sometimes also in feet).

The two most common markings found on the back of Mondaine watches are:

30 100 3 which means it has been tested at 30m, 100ft, 3 atm, and

100 300 10 which equates to 100m, 300ft and 10 atm.

An indication of the test pressure in terms of water depth does not mean a water resistant watch was designed for repeated long-term use in such water depths. For example, a watch marked 30 metres water resistant cannot be expected to withstand activity for longer time periods in a swimming pool, let alone continue to function at 30 metres under water. This is because the test is conducted only once using static pressure on a sample of newly manufactured watches. The test for qualifying a diving watch for repeated usage in a given depth includes safety margins to take factors into account like aging of the seals, the properties of water and seawater, rapidly changing water pressure and temperature, as well as dynamic mechanical stresses encountered by a watch.  This adds to the importance of changing seals at battery replacement time for example.

So what in practical terms does this mean?

3 ATM activities at this depth might include accidental splashing from hand washing or rain, but not washing up.

5 ATM – will cope with the above plus showering or swimming in shallow water

10 ATM – will also cope with swimming or snorkelling

30 ATM – will also cope with skin diving

50 ATM – will also cope with Scuba Diving

The first indication that you have water ingress is a slight misting on the inside of the glass.  IMMEDIATE action is required by a qualified watch repairer to dry the watch out before rusting occurs.  See the post on How To Get My Mondaine Repaired

The weakpoint of all watches is the crown adjuster which alters the date or time.

The hands on my Mondaine clock are bent.

This is an occasional problem usually associated with moving home and the clock getting knocked.

Mondaine produce a high quality product at quite a reasonable price, but the engineering and design challenge in replicating the look of the actual station clock has presented some problems for Mondaine.  The second hand has, as you know, a large spot on the end which replicates the signal used by guards or conductors on the trains to let the driver know that it is safe and ready to move off.  Excellent so far!  However, this spot puts a strain on the pivot at the motor and makes the second hand unbalanced.  To rectify this, Mondaine has put a counter-balancing weight on the opposite end.  This is a very fine balance which can be upset if the clock receives a knock.  Your first port of call is the Mondaine Service Centre which will rectify the issue (see where can I get my watch serviced above).  Alternatively, use a local clock maker who could do the job for you.  If you wish to carry this out yourself, it can be done.

The remedy is easy, but needs careful attention.  You will need:

  • a soft cloth on which to rest the clock face down
  • a small to medium cross-head screwdriver
  • a very small cross-head screwdriver
  • a very sharp bladed knife or Stanley blade
  • a small pair of square end pliers
  1. Place the clock face down on the cloth
  2. Remove the battery (ies)
  3. Remove the four large screws and take off the back of the clock
  4. (Large clock only) Remove the power input at 6.00 position.  Gently use the pliers to to unscrew the outer ring and push the socket clear of the clock.
  5. At each stanchion around the clock on which the back sits, there is a screw.  Additionally there are screws between the stanchions.  Remove these also.
  6. Withdraw the whole back of the clock from the frame.
  7. (Small clock) there is a “sellotape” seal joining the clock and the glass.  Slide the sharp knife around the join to split the glass and the clock.
  8. (Large clock)  As above, but there is a synthetic rubber seal around the glass which needs to remain on the rim.  If it comes off, it is difficult to put back, but it is not the end of the world if you cannot get it back on; the clock can still function.
  9. Carefully turn the clock over.  If the second hand has become bent or unbalanced gently press the centre to ensure that it is fully home.  If it is bent, try to spot at which point it becomes distorted and use this point as a fulcrum with your finger and bend the second hand up or down depending on what has happened.  DO NOT bend the whole second hand as this will put a strain on the pivot mechanism and you risk distorting it and making matters worse.
  10. Replace the glass in the frame and replace the back carefully aligning the screw holes holes.
  11. Reverse the above steps.

Replacement handbooks or manuals

Did you know you can obtain replacement handbooks and manuals?  

Try this link to download a pdf (instruction manuals) for all models of Mondaine Official Swiss Railways Watches.

Please note, that download link will take you to Mondaine official website.

Will I get this reaction to Mondaine watches?

I am sensitive to some base metals and especially have an allergic reaction to Nickel.  Will I get this reaction to Mondaine watches?

Mondaine, as a thoroughly responsible company, subjects all of its range to stringent tess to ensure they comply with EC and International standards.



To quote them:

The materials used by Mondaine are subjected to severe tests in order to avoid allergies. For those who are hyper-sensitive to stainless steel we recommend you buy a watch which is made from titanium, gold or plastic.

Can’t say fairer than that!  Most good retailers will I am sure be prepared to let you test drive the model you are interested in to see if there is a reaction.  Obviously, you would need to return the watch in perfect condition if you prove to be a reactor.

Where can I get my Mondaine serviced?

Mondaine watches are hard wearing and made to a high standard, but even so, occasionally the watch will need a service to maintain it.  The Mondaine service centre offers a range of services to keep you on time.

They offer a partial maintenance from a bracelet sizing service around £15 or so, or more complicated work including:

  • Rating/regulating check
  • replace crown, gaskets and a new battery where needed
  • water resistance control
  • Case and bracelet cleaning
  • Final bench testing

Costs vary according to the sophistication of the watch but expect to pay £20-£35 or so.

There is also a complete maintenance service:

  • Movement dissembling, cleaning, reassembling, oiling, regulating and functions checked
  • Replace crown, gaskets and battery where necessary.
  • Repair or replacement of worn movement parts
  • Water resistance control and case and bracelet cleaning and bench testing.

Expect to pay £50-£80 or so, and of course parts are extra.

Another optional service restores your watch to near perfect condition, with cleaning, polishing and scratch removal.  This is not a guaranteed restoration as obviously it depends on the depth of scratches etc.  But talk to them and get advice.

The address is:
Mondaine Service Centre,
Locker Hull and Thornton Ltd
10 High View Close
Vantage Business Park
Hamilton
LE4 9LJ

01664-420003 or mondaine@lockerhullthornton.com
Go to site.

A word of sensible advice – do use a “signed for” delivery service (Royal mail is perfect) and attach a tag with your details on it.  Do feel free to ask for an estimate. Allow a couple of weeks for diagnosis and estimate, and another couple or so from go ahead for the work to be completed.

My Chronograph doesn’t go to zero

Sometimes when you zero your Chronograph after using the stop watch and pause function, the second hand does not go back to zero.  You need to reset it and this is how you do it!

Instructions for re-setting.
On the right are 3 buttons lettered from the top A, B and C, and you will need to adjust the second hand (S), the 10th second elapsed hand (10th), and the minute elapsed hand (M).

1. Pull crown button B out to position 2. Press buttons A and C simultaneously for at least 2 seconds. This enters the adjustment mode.

2.  Adjusting second hand (S). Press A and the hand will move once; press sufficiently to allow chrono second hand to work towards 12 at the top. Confirm the adjustment by pressing button C.
3.  Adjusting 10th second hand (10th). Press A as above and it will move once, continue until the hand goes to 10 or 0 at the tiop. Confirm the adjustment by pressing button C
4.  Adjusting chrono minute hand (M). Press button A until the hand is set to 30. Confirm the adjustment by pressing button C
5.  Press B crown button back in and this is now reset.
Tip – for fast forwarding button A, press and hold for at least 1 second.